LED bilan Citroen/Peugeot Lexia3 PP2000 Diagbox V9.68 uchun
Original saytga havola- 100 — 1999 шт 5000$/donasiga
- 2000 — 50119 шт 4000$/donasiga
- 50120+ шт 3000$/donasiga
1,5$ foto hisobot + tekshiruv
Biz tovarni tekshiramiz va foto hisobot tuzamiz, shunda siz to'g'ri mahsulotni olganizga ishonch hosil qilishingiz mumkin.
Xitoydan Ukraina, O'zbekiston, Yevropa davlatlariga yetkazib berish.
Yetkazib berish, Xitoyda omborga kelganda to'lanadi
Mahsulotlarni qaytarish faqat bizning Xitoydagi omborimizda bo'lganida mumkin. Xitoydan jo'natilgan narsalarni qaytarib bo'lmaydi.
Foto va mahsulot tavsifi
1. Newest software version Diagbox V9.68
Diagbox Version
Please DO NOTICE ,Lexia parcel default CD Diagbox VERSION is V9.68(please Disconnect internet when install software,otherwise device damaged and broken)
2. With 4 cables,supports more old car models
3.LEXIA3 Full Chips Version With Power Function:
For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citroen and for eugeot center repair shop has username and password, please note it.
4. Support Multi-Language:
Lexia 3 PP2000 Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia3 Diagbox Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
Lexia, lexia 3 PP2000 diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics Lexia ,lexia 3 PP2000 is performed via OBD2 connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
1.Lexia ,lexia 3 PP2000 is compatible with for Citroen cars including: C1,C2,C3,C4,C6,C8,for C-CROSSER,for NEMO,for BERLINGO,for JUMPY,for JUMPER,for AX,for SAXO,for BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2.Lexia ,lexia 3 PP2000 is compatible with most for Peugeot cars from 1995,but it can not work good with for Peugeot 307 after 2004 year.If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Lexia ,lexia 3 PP2000 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Lexia 3 PP2000Supported Functions:
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.
3. Clear Fault Codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)
7. Programming Functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
8. Control Unit
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDDspace and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP withthe latest service pack installed.
Car coverage:
1.P2000,Lexia 3 is compatible with most for Peugeot cars from 1995.
2.PP2000,Lexia-3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
For Citroen
C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/
C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/
BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-
TRIOMPHE/ C-QUATRE
For Peugeot
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/
1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/
406/ 605/ 806
1. PP2000 and lexia softare only be installed inXP system 32 bit.Diagbox software only be installed inwin7 system 32 bit.
2. Pls don't install lexia and pp2000 software together with Diagbox software in one pc.Diagbox software has included pp2000 and lexia software, Diagbox need be installed in one laptop individually.
3. When installing software, pleaseclose your anti-virus software and firewall.
otherwise the software willbe damaged.
4.please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package! After complete update please paste the cutted file back into the previous folder which can avoid activating problem.
V7.02 - 7.76: scary01
V7.76-7.82: Maitresox01
LEXIA-3/PP2000 Package List:
PlusFull Chip PCB Version: