Ukraine
Uzbekistan
Poland
South Africa
Nigeria
Biz sahifani tarjima qilamiz. Iltimos kuting
FTE7500A-CWDM-12高级光时域反射计 OTDR
Original saytga havola- 100 — 1999 шт 5000$/donasiga
- 2000 — 50119 шт 4000$/donasiga
- 50120+ шт 3000$/donasiga
Mavjud 0 dona
144,93
$
+ Xitoy ichida yetkazib berish
1,8$
Mavjud emas
1,5$ foto hisobot + tekshiruv
Biz tovarni tekshiramiz va foto hisobot tuzamiz, shunda siz to'g'ri mahsulotni olganizga ishonch hosil qilishingiz mumkin.
Foto otchet qo'shish
Xitoydan Ukraina, O'zbekiston, Yevropa davlatlariga yetkazib berish.
Yetkazib berish, Xitoyda omborga kelganda to'lanadi
Mahsulotlarni qaytarish faqat bizning Xitoydagi omborimizda bo'lganida mumkin. Xitoydan jo'natilgan narsalarni qaytarib bo'lmaydi.
Foto va mahsulot tavsifi
FTE7500A-CWDM-12 OTDR高级光时域反射计
The FTE7500A-CWDM-12 offers up to 12 CWDM Wavelengths in a Single OTDR. These OTDRs may be order with 8, 10 or even 12 CWDM wavelengths. Standard units include 1471-1611nm for 8 wavelengths and 1431-1611nm for 10 wavelengths or configure a 12 wavelength unit using the 1471-1611nm 8 wavelength unit and add 4 additional wavelengths of your choice. Test a fiber at 1, 2 or up to 12 wavelengths with the touch of just one button. The Fault Finder mode uses one button to scan a fiber under test, have the OTDR select the best parameters at the selected wavelength and displays event analysis. The onboard Broadband Power Meter is calibrated at up to 12 CWDM wavelengths. to match the OTDR configuration. The FTE7500A-CWDM may be used as a CW light source. Select any of the configured wavelengths as a CW light source for commissioning or for Loss test with the onboard Power Meter.
The CertSoft Software Suite, project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image.
Features
?7?8 35 dB Dynamic Range
?7?8 Express Help System
?7?8 CW & Fiber Identifier Light Source
?7?8 Video Scope With Pass/Fail Grading Zones
?7?8 Integrated Power Meter
?7?8 Bidirectional Trace Analysis with Certsoft
?7?8 Full Auto, Construction and Expert Modes
?7?8 Live Fiber Detection
?7?8 Onboard Memory of ~4000 traces
?7?8 CertSoft Report Software with .sor Capability
?7?8 Dual Trace Capability
| Ordering Infomation | |
| FTE-7500A-CWDM-12 | 1471-1611nm +4 Additional Wavelengths of Choice, CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately) |
| FTE-7500A-CWDM-10 | 1431-1611nm 10 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately) |
| FTE-7500A-CWDM-OE | 1271-1411nm, 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately) |
| FTE-7500A-CWDM-SCL | 1471-1611nm 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately) |
| FTE-SCASE-LG | Soft Case for FTE7500, FTE600 and FTE8000 Series |
| VIS-300 | Video Probe For FTE7000 and FTE7500-CWDM and FTE7500-DWDM Series |
| FTE-7500A-CWDM Specifications | |
| Wavelength | CWDM Wavelenghts (1271nm-1611nm) as Configured +/-3nm |
| Dynamic Range | 35dB |
| Pulse Width | 5 - 20,000 ns |
| Units of Measurement | km, kf, mi |
| Event Dead zone | 1m |
| Attenuation Dead Zone | 4m |
| Resolution | .125 - 32m |
| Distance Uncertainty | ±(0.75m + 0.005% x distance + sampling resolution) |
| Full Scale Distance Range | 10.25-260km |
| Typical Real-time Refresh Rate | 2 Hz |
| Group Index of Refraction (GIR) | 1.024 - 2.048 |
| Linearity | ± .05 dB/dB |
| Memory Capacity | ~500 |
| Memory Type | Internal and External USB Flash Drive |
| Power Supply / Charger | Input 100-240VAC, 50-60Hz, 0.3A, Output 13.6V, 1.2A |
| Battery | 8hr |
| Storage Temperature | -20 to 60 C |
| Operating Temperature Range | -10 to 40 C |
| Dimensions (w/out rubber boot ) | 8.62” L x 4.25” W x 2.375” H (219mm L x 108mm W x 60mm H) |
| Weight | 2 lbs |
| Communications ports | USB and USB Flash Drive Ports |
| Connector Styles | FC, ST, SC Interchangeable |
| Accessories Provided | Universal Power Adapter w/interchangeable mains, Interchangeable FC/ST and SC Adapters for optical port and FC, ST, SC, 1.25mm and 2.5mm universal adapters for power meter port, Software, Manual on CD and Protective Rubber Boot |
| Power Meter | |
| Detector Type | InGaAs |
| Connector Type | Interchangeable - FC?ST/SC/1.25mm univ and 2.5mm univ. |
| Measurement Range | +5 to -77dB (CATV - +25 to -57dB) |
| Calibrated Wavelengths | As configured with OTDR wavelengths |
| Units of Measurement | dBm, dB |
| Resolution | .01 dB |
| Power Measurement Uncertainty |
±0.18 dB under reference conditions |
| ± 0.25 dB from 0 to -65 dBm | |
| ± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBm | |
| CW Source | |
| Fiber Type | Single mode, Multimode |
| Wavelengths | (Light Source Wavelengths are Limited by the OTDR Configuration) |
| Output Power | 0 dBm |
| Laser Safety Classification | Class I Safety Per FDA/CDRH and IEC-825-1 Regulation |
| Modulation Modes | CW, 270 Hz, 1000 Hz, 2000 Hz |
| Visible Light Source | |
| Emitter Type | Laser |
| Wavelength | 650nm ±5nm |
| Laser Safety Class | Class IIFDA21 CFR1040.10 &1040.11 IEC 825-1: 1993 |
| Connector Type | 2.5mm Universal |
| >Output Power | 1mW Max. |